I have a Ubuntu 14.04 host with this config:
ifconfig:
Guest network config:
![]()
configvirt-manager.png
I'm able to access/ping to the guest machine from any other machine of the network. But I can't do it host <=> guest:
host => guest
guest => host (sorry for the spanish)
The host => guest arping works ok!!
But I cannot ping directly or use any other service. Any solution? I want that the guest machine looks in the network like any other real machine.
Code:
$ brctl show
bridge name bridge id STP enabled interfaces
virbr0 8000.000000000000 yesifconfig:
Code:
$ifconfig
em1 Link encap:Ethernet HWaddr f8:bc:12:41:54:2c
inet addr:10.105.3.174 Bcast:10.105.3.255 Mask:255.255.252.0
inet6 addr: fe80::fabc:12ff:fe41:542c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12929453 errors:0 dropped:35056 overruns:0 frame:0
TX packets:5711442 errors:65 dropped:0 overruns:0 carrier:0
collisions:348042 txqueuelen:1000
RX bytes:4199352937 (4.1 GB) TX bytes:3621341059 (3.6 GB)
Interrupt:16
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:247410 errors:0 dropped:0 overruns:0 frame:0
TX packets:247410 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:471219741 (471.2 MB) TX bytes:471219741 (471.2 MB)
macvtap0 Link encap:Ethernet HWaddr 52:54:00:25:ce:8b
inet6 addr: fe80::5054:ff:fe25:ce8b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3524694 errors:16 dropped:16 overruns:0 frame:0
TX packets:508283 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:334642552 (334.6 MB) TX bytes:33851959 (33.8 MB)
tap0 Link encap:Ethernet HWaddr 0e:f6:5f:b1:36:d0
inet addr:192.168.100.151 Bcast:192.168.100.255 Mask:255.255.255.0
inet6 addr: fe80::cf6:5fff:feb1:36d0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1419732 errors:0 dropped:0 overruns:0 frame:0
TX packets:314900 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:287785383 (287.7 MB) TX bytes:156840878 (156.8 MB)
virbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:91794797 errors:0 dropped:0 overruns:0 frame:0
TX packets:48168192 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:135117531316 (135.1 GB) TX bytes:5636029278 (5.6 GB)Guest network config:
configvirt-manager.png
I'm able to access/ping to the guest machine from any other machine of the network. But I can't do it host <=> guest:
host => guest
Code:
$ ping 10.105.2.65
PING 10.105.2.65 (10.105.2.65) 56(84) bytes of data.
From 10.105.3.174 icmp_seq=1 Destination Host UnreachableCode:
C:\Users\admin>ping 10.105.3.174
Haciendo ping a 10.105.3.174 con 32 bytes de datos:
Respuesta desde 10.105.2.65: Host de destino inaccesible.The host => guest arping works ok!!
Code:
$ nmap -Pn -n 10.105.2.65
Starting Nmap 6.40 ( http://nmap.org ) at 2014-06-29 20:57 CEST
Nmap scan report for 10.105.2.65
Host is up (0.090s latency).
All 1000 scanned ports on 10.105.2.65 are filtered
Nmap done: 1 IP address (1 host up) scanned in 14.06 seconds