I've got a Windows machine that needs to use the "br0" that I've created. I've got two other machines using this bridge, but I created them with virt-manager.
I need to know how to convert this:
Into the qemu command line format. Here is my Windows machine startup script:
Thanks in advance!
I need to know how to convert this:
Code:
<interface type='bridge'>
<mac address='52:54:00:2f:bf:85'/>
<source bridge='br0'/>
<model type='rtl8139'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'$
</interface>Code:
#!/bin/bash
configfile=/etc/vfio-pci1.cfg
vfiobind() {
dev="$1"
vendor=$(cat /sys/bus/pci/devices/$dev/vendor)
device=$(cat /sys/bus/pci/devices/$dev/device)
if [ -e /sys/bus/pci/devices/$dev/driver ]; then
echo $dev > /sys/bus/pci/devices/$dev/driver/unbind
fi
echo $vendor $device > /sys/bus/pci/drivers/vfio-pci/new_id
}
modprobe vfio-pci
cat $configfile | while read line;do
echo $line | grep ^# >/dev/null 2>&1 && continue
vfiobind $line
done
sudo qemu-system-x86_64 -enable-kvm -M q35 -m 4096 -cpu host,kvm=off \
-smp 4,sockets=1,cores=1,threads=1 \
-bios /usr/share/qemu/bios.bin -vga none \
-device ioh3420,bus=pcie.0,addr=1c.0,multifunction=on,port=1,chassis=1,id=root.1 \
-device pci-assign,host=00:14.2 \
-device vfio-pci,host=07:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on,romfile=/home/ben/Downloads/GF114.rom \
-device vfio-pci,host=07:00.1,bus=root.1,addr=00.1 \
-drive file=/home/ben/KVM-Images/Windows.qcow2,id=disk,format=qcow2 -device ide-hd,bus=ide.0,drive=disk \
-drive file=/home/ben/Downloads/arma2oa.iso,id=isocd -device ide-cd,bus=ide.1,drive=isocd \
-usb -usbdevice host:06a3:8021 -usbdevice host:0461:4d03 \
-boot menu=on
exit 0