Hi all. I have been running a number of virtual hosts on a KVM on Ubuntu 12.04 server, using bridged network (so they are network accessible). This has been working fine, until today, I decided to try out bind/named so that I could more easily reference the machines on the local network.
The host server is a Ubuntu 12.04 server version with all the latest patches, and my network configuration is as follows:
All the virtual machines get their IP address from the main networks DHCP server. And I have no virtual networks defined. They access the internet fine.
So for example The host (hypervisor) IP address is 10.10.20.10 (as above), a network config for one of the virtual machines is as follows:
It works online, and has been assigned 10.10.200.100. The problem is I've set the DNS to 10.10.20.10, and it doesn't resolve, using dig @10.10.20.10 www.google.co.uk doesn't work either. dnsmasq is NOT running on the host, and 10.10.20.10 DNS server works from other machines on the network. Also I can connect to port 80, and ssh port from the virtual machine to the hypervisor. Please help!
Regards,
Martin
The host server is a Ubuntu 12.04 server version with all the latest patches, and my network configuration is as follows:
Code:
br0 Link encap:Ethernet HWaddr 00:19:99:cb:56:54 inet addr:10.10.20.10 Bcast:10.10.255.255 Mask:255.255.0.0
inet6 addr: fe80::219:99ff:fecb:5654/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7578 errors:0 dropped:0 overruns:0 frame:0
TX packets:7587 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:490666 (490.6 KB) TX bytes:569629 (569.6 KB)
eth0 Link encap:Ethernet HWaddr 00:19:99:cb:56:54
inet6 addr: fe80::219:99ff:fecb:5654/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7925 errors:0 dropped:0 overruns:0 frame:0
TX packets:7854 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:662305 (662.3 KB) TX bytes:638285 (638.2 KB)
Interrupt:20 Memory:f7f00000-f7f20000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2169 errors:0 dropped:0 overruns:0 frame:0
TX packets:2169 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:134846 (134.8 KB) TX bytes:134846 (134.8 KB)
vnet0 Link encap:Ethernet HWaddr fe:54:00:69:24:96
inet6 addr: fe80::fc54:ff:fe69:2496/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:240 errors:0 dropped:0 overruns:0 frame:0
TX packets:371 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:30511 (30.5 KB) TX bytes:37162 (37.1 KB)So for example The host (hypervisor) IP address is 10.10.20.10 (as above), a network config for one of the virtual machines is as follows:
Code:
<interface type='bridge'>
<mac address='52:54:00:69:24:96'/>
<source bridge='br0'/>
<target dev='vnet0'/>
<model type='virtio'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>Regards,
Martin