Hi folks..
I've got a bit of stuff running in LXD fine using conventional bridged networking and the local lxd-bridge network and now I'd like to simulate a private subnet behind a linux router/firewall to do a POC for a project..
My google-foo has let me down on this one, so thought I'd post here as I've clearly missed something along the way. :-)
The setup so far..
16.04 lxd, br0 bridged to eth0.
I created another bridge just using "brctl addbr brt1" and then created a profile called 'bridge' with the following:
And a profile called 'client' with the following:
Then creating some containers with:
I then went into the containers and manually set IP's on the brt1 nics but they can't ping each other.. (Not worried about routing etc yet, if I can ping I can fix everything else. :) )
so lxc list gives:
Going forward I want to put a DHCP server on 'bridge' that hands out addresses to client'x' as well, so I'm guessing some sort of promiscuous setting will be required as well, but again, if I can ping I'd be happy.
Anyone got a pointer in the right direction for this?
I've got a bit of stuff running in LXD fine using conventional bridged networking and the local lxd-bridge network and now I'd like to simulate a private subnet behind a linux router/firewall to do a POC for a project..
My google-foo has let me down on this one, so thought I'd post here as I've clearly missed something along the way. :-)
The setup so far..
16.04 lxd, br0 bridged to eth0.
I created another bridge just using "brctl addbr brt1" and then created a profile called 'bridge' with the following:
Code:
name: bridge
config: {}
description: ""
devices:
eth0:
nictype: bridged
parent: br0
type: nic
eth1:
nictype: bridged
parent: brt1
type: nicAnd a profile called 'client' with the following:
Code:
name: clients
config: {}
description: ""
devices:
eth0:
nictype: bridged
parent: brt1
type: nicThen creating some containers with:
Code:
lxc launch ubuntu:16.04 bridge -p bridge
lxc launch ubuntu:16.04 client1 -p clientsso lxc list gives:
Code:
+----------+---------+--------------------------------+------+------------+-----------+
| NAME | STATE | IPV4 | IPV6 | TYPE | SNAPSHOTS |
+----------+---------+--------------------------------+------+------------+-----------+
| bridge | RUNNING | 10.86.1.156 (eth0) | | PERSISTENT | 0 |
| | | 172.25.1.1 (eth1) | | | |
+----------+---------+--------------------------------+------+------------+-----------+
| client1 | RUNNING | 172.25.1.2 (eth0) | | PERSISTENT | 0 |
+----------+---------+--------------------------------+------+------------+-----------+
| client2 | RUNNING | 172.25.1.3 (eth0) | | PERSISTENT | 0 |
+----------+---------+--------------------------------+------+------------+-----------+Anyone got a pointer in the right direction for this?