This was working earlier today, had been working for months, then I switched out my router and things are all goofed. No matter what I do I can't get the lxd containers to grab an IP address from the new dhcp server.
Here is some context to help out, not sure what info is most needed, so appologies if this is too much info:
First my networking configuration:
now my /etc/network/interfaces
Now some lxd info:
Here is one containers config:
and the defult profile:
Here is the list output:
no matter what I do i can't seem to get it an ip address.
Anyone have any suggestions on how to figure this out? Any other info needed I can get.
Thanks in advance for any help you can provide.
Here is some context to help out, not sure what info is most needed, so appologies if this is too much info:
First my networking configuration:
Code:
br0 Link encap:Ethernet HWaddr 08:60:6e:10:f6:07
inet addr:192.168.86.50 Bcast:192.168.86.255 Mask:255.255.255.0
inet6 addr: fe80::a60:6eff:fe10:f607/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3012 errors:0 dropped:0 overruns:0 frame:0
TX packets:239 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:485927 (485.9 KB) TX bytes:44974 (44.9 KB)
vethSEROPP Link encap:Ethernet HWaddr fe:20:fe:62:cf:b7
inet6 addr: fe80::fc20:feff:fe62:cfb7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1192 (1.1 KB) TX bytes:868 (868.0 B)Code:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto enp3s0
iface enp3s0 inet manual
auto br0
iface br0 inet dhcp
bridge-ports enp3s0Code:
lxc --version
2.7Code:
lxc info proxy
Name: proxy
Remote: unix:/var/lib/lxd/unix.socket
Architecture: x86_64
Created: 2016/04/28 17:43 UTC
Status: Running
Type: persistent
Profiles: default
Pid: 17406
Ips:
eth0: inet6 fe80::216:3eff:fe05:aab4 vethVRJU1E
lo: inet 127.0.0.1
lo: inet6 ::1
Resources:
Processes: 6
Disk usage:
root: 496.02MB
CPU usage:
CPU usage (in seconds): 1
Memory usage:
Memory (current): 11.77MB
Memory (peak): 32.62MB
Network usage:
eth0:
Bytes received: 568 bytes
Bytes sent: 600 bytes
Packets received: 7
Packets sent: 4
lo:
Bytes received: 0 bytes
Bytes sent: 0 bytes
Packets received: 0
Packets sent: 0Code:
lxc profile show default
name: default
config: {}
description: Default LXD profile
devices:
eth0:
nictype: bridged
parent: br0
type: nic
usedby:
- /1.0/containers/proxyCode:
lxc list proxy
+-------+---------+------+------+------------+-----------+
| NAME | STATE | IPV4 | IPV6 | TYPE | SNAPSHOTS |
+-------+---------+------+------+------------+-----------+
| proxy | RUNNING | | | PERSISTENT | 0 |
+-------+---------+------+------+------------+-----------+Anyone have any suggestions on how to figure this out? Any other info needed I can get.
Thanks in advance for any help you can provide.