Hi all,
I have referred to many GPU passthrough guides but mainly based on this site since the progress I got is the furthest.
My setup is as follows:
-HP Envy 700-070d
-Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz-Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller
-NVIDIA GeForce GTX 770
-Linux 16.04 LTS x86_64 Kernel: 4.8.17
-One monitor is connected to the motherboard DVI port, the other connected to NVIDIA DVI port
What I want to achieve is to host Linux on Intel Integrated Graphics and a Windows VM on my Nvidia card.
However, I am stuck with a blank monitor on the iGPU whereas a purple screen with Tux logos on the Nvidia monitor.
I tried reconfiguring with both gdm and lightdm. But both ended up on the same blank screen despite a short Ubuntu loading screen on gdm.
After applying the ASC patch, this is my current IOMMU grouping:
Unlike the guide, I have to blacklist nouveau in /etc/modprobe.d/blacklist.conf as such:
This is what I managed to get after blacklisting nouveau:
And the kernel information on the GPUs are as follows:
The respective GPUs seem to be correctly claimed but I have no idea why there is no display on the iGPU monitor.
And for your information, there's display when I physically remove the NVIDIA card from the motherboard. :mad::mad:
I have also tried updating Intel graphics drivers and using nomodeset on grub.
On bios, Virtualization Technology is enabled and Intel VGA Controller is set as the Primary VGA device.
Any suggestion or advice is appreciated!!
I have referred to many GPU passthrough guides but mainly based on this site since the progress I got is the furthest.
My setup is as follows:
-HP Envy 700-070d
-Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz-Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller
-NVIDIA GeForce GTX 770
-Linux 16.04 LTS x86_64 Kernel: 4.8.17
-One monitor is connected to the motherboard DVI port, the other connected to NVIDIA DVI port
What I want to achieve is to host Linux on Intel Integrated Graphics and a Windows VM on my Nvidia card.
However, I am stuck with a blank monitor on the iGPU whereas a purple screen with Tux logos on the Nvidia monitor.
I tried reconfiguring with both gdm and lightdm. But both ended up on the same blank screen despite a short Ubuntu loading screen on gdm.
After applying the ASC patch, this is my current IOMMU grouping:
Code:
IOMMU Group 0 00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
IOMMU Group 10 00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04)
IOMMU Group 11 00:1f.0 ISA bridge [0601]: Intel Corporation Z87 Express LPC Controller [8086:8c44] (rev 04)
IOMMU Group 11 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 04)
IOMMU Group 11 00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04)
IOMMU Group 12 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK104 [GeForce GTX 770] [10de:1184] (rev a1)
IOMMU Group 12 01:00.1 Audio device [0403]: NVIDIA Corporation GK104 HDMI Audio Controller [10de:0e0a] (rev a1)
IOMMU Group 13 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
IOMMU Group 14 04:00.0 Network controller [0280]: Broadcom Corporation BCM43228 802.11a/b/g/n [14e4:4359]
IOMMU Group 1 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06)
IOMMU Group 2 00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06)
IOMMU Group 3 00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 04)
IOMMU Group 4 00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
IOMMU Group 5 00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04)
IOMMU Group 6 00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04)
IOMMU Group 7 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4)
IOMMU Group 8 00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d4)
IOMMU Group 9 00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d4)Code:
blacklist nouveau
blacklist nvidiafbCode:
*-display description: VGA compatible controller
product: GK104 [GeForce GTX 770]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=vfio-pci latency=0
resources: irq:255 memory:f6000000-f6ffffff memory:e0000000-e7ffffff memory:e8000000-e9ffffff ioport:e000(size=128) memory:c0000-dffff
*-display
description: VGA compatible controller
product: Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 06
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list
configuration: driver=i915 latency=0
resources: irq:33 memory:f7400000-f77fffff memory:d0000000-dfffffff ioport:f000(size=64)Code:
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
DeviceName: Onboard IGD
Subsystem: Hewlett-Packard Company Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller
Kernel driver in use: i915
Kernel modules: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 770] (rev a1)
Subsystem: CardExpert Technology GK104 [GeForce GTX 770]
Kernel driver in use: vfio-pci
Kernel modules: nvidiafb, nouveau
01:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)
Subsystem: CardExpert Technology GK104 HDMI Audio Controller
Kernel driver in use: vfio-pci
Kernel modules: snd_hda_intelAnd for your information, there's display when I physically remove the NVIDIA card from the motherboard. :mad::mad:
I have also tried updating Intel graphics drivers and using nomodeset on grub.
On bios, Virtualization Technology is enabled and Intel VGA Controller is set as the Primary VGA device.
Any suggestion or advice is appreciated!!