Hello, I already installed Ubuntu Server 16.04 (guest) in VirtualBox on my Windows 7 host machine.
Now I'm having trouble with connecting to internet.
On my VM Seetings I have 1 Bridged Adapter and have selected Realtek RTL8188CE 802.11b/g/n Wifi Adapter. On Advanced I have Promiscuous Mode denied and Cable Connected unchecked.
Here are some logs that could help with the diagnose of my problem.
cat /etc/network/interfaces
ls /sys/class/net
sudo route -n
ip route list
ping 8.8.8.8
ping google.com
sudo lshw -C network
From Windows when I type ipconfig I noticed that the ip con my machine is the same as the one on my vm. I tried to change my ip of my vm to 10.147.168.122 but it stayed the same.
I also copied and pasted the netmask and gateway from there.
Could someone please tell me if this is accurate?
Some guidance would be appreciated.
Now I'm having trouble with connecting to internet.
On my VM Seetings I have 1 Bridged Adapter and have selected Realtek RTL8188CE 802.11b/g/n Wifi Adapter. On Advanced I have Promiscuous Mode denied and Cable Connected unchecked.
Here are some logs that could help with the diagnose of my problem.
cat /etc/network/interfaces
Code:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5)
source /etc/network/interfaces.d/*
#The loopback network interface
auto lo
iface lo inet loopback
#The primary network interface
auto enp0s3
iface enp0s3 inet static
address 10.147.168.121
netmask 255.255.192.0
gateway 10.147.128.1
dns-nameservers 8.8.8.8 8.8.4.4Code:
enp0s3 loCode:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Ude Iface
0.0.0.0 10.147.128.1 0.0.0.0 UG 0 0 0 enp0s3
10.147.128.0 0.0.0.0 255.255.192.0 U 0 0 0 enp0s3Code:
default via 10.147.128.1 dev enp0s3 onlink linkdown
10.147.128.0/18 dev enp0s3 proto kernel scope link src 10.147.168.121 linkdownCode:
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data
From 10.147.168.121 icmp_seq=1 Destination Host UnreachableCode:
ping: unknown host google.comCode:
*-network
description: Ethernet interface
product: 82540EM Gigabit Ethernet Controller
vendor: Intel Corporation
physical id:3
bus info: pci@0000:00:03.0
logical name: enp0s3
version: 02
serial: 08:00:27:07:9f:a4
capacity: 1Gbit/s
width: 32 bits
clock: 66MHz
capabilities: pm pcix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k8-NAPI ip=10.147.168.121 latency=64 link=no mingnt=255 multicast=yes port=twisted pair
resources: irq:9 memory:f0000000-f001ffff ioport:d010(size=8)I also copied and pasted the netmask and gateway from there.
Could someone please tell me if this is accurate?
Some guidance would be appreciated.